LISP: FRITZ!Box as a LISP Router
FRITZ!Box 7560
75
12.10 LISP: FRITZ!Box as a LISP Router
LISP is a routing architecture which separates information
about location and identity. There are two IP addresses: one
for the location and one for the identity.
The FRITZ!Box can be configured as a LISP router.
•
This chapter address system administrators.
•
It presents a short introduction to LISP.
•
You receive an overview about the possibilities for using
LISP.
•
This section includes instructions on how to configure
the FRITZ!Box as a LISP router.
Definition and Components
LISP: Definition
LISP: Locator/Identifier Separation Protocol
IP protocol
LISP is a protocol for the transmission of IP
packets.
IP address pairs
LISP uses IP address pairs:
•
One IP address for identification, which is
called the EID (Endpoint Identifier). The
EID can be the IP address of a host or an
entire IP subnet.
•
One IP address for the location, known as
the RLOC (Routing Locator). The RLOC is
the IP address of the LISP router.
Tunnel protocol
LISP is a tunnel protocol.
A LISP packet consists of an internal IP packet
and an additional external header. The header
of the internal packet contains the EID; the ex-
ternal header contains the RLOC.