Cannot Access Devices in the Network
FRITZ!WLAN Repeater 450E
43
check the user interface (see
).
For connections to the wireless access point the
FRITZ!WLAN Repeater applies the encryption method and net-
work key of the access point. If the connection was estab-
lished using WPS, the access point has WPA/WPA2 encryp-
tion configured.
Another wireless radio network in the vicinity of the
FRITZ!WLAN Repeater and the wireless access point is caus-
ing interference.
Test a different radio channel. If possible, set automatic radio
channel selection in the wireless access point. Your
FRITZ!WLAN Repeater then will use the same channel auto-
matically.
16.5
Cannot Access Devices in the Network
No other devices in the network can be accessed.
A firewall is running on the devices.
Configure the firewall to allow access to the network.
The devices are not configured to receive their IP addresses
automatically.
Set up the devices as directed in the section
.
Cause
Help
Cause
Help
Cause
Help
Cause
