No Connection with the Wireless Access Point
FRITZ!WLAN Repeater 450E
39
You are attempting to register the FRITZ!WLAN Repeater at
your wireless access point using WDS (Wireless Distribution
System).
The FRITZ!WLAN Repeater does not support WDS. For instruc-
tions on connecting the FRITZ!WLAN Repeater with your wire-
less access point, see
Another wireless radio network in the vicinity is causing inter-
ference.
Test a different radio channel. If possible, set automatic radio
channel selection in the wireless access point.
Cannot establish a wireless LAN connection between the
FRITZ!WLAN Repeater and the wireless LAN access point via
WPS.
The connection via WPS failed.
Start the connection procedure again (see
reless LAN Connection Using WPS
).
The “LAN Bridge” operating mode is set in the
FRITZ!WLAN Repeater. In this mode the wireless LAN access
point can only be connected using a LAN cable. In this operat-
ing mode you can use WPS only to connect wireless devices
like notebooks and smartphones with the FRITZ!WLAN Re-
peater.
Cause
Help
Cause
Help
Cause
Help
Cause
Help
