FRITZ!Box 6810 LTE
62
WLAN—Getting Technical
IEEE 802.11b
With a maximum throughput rate of 11 Mbit/s, this is the old-
est WLAN standard. Older WLAN devices of the first genera-
tion can communicate with the FRITZ!Box using 802.11b.
However, if the WLAN device supports newer standards such
as 802.11g, the latest standard should be used.
IEEE 802.11g
This is currently the most common WLAN standard. It commu-
nicates with a maximum of 54 Mbit/s gross in the 2.4-GHz
frequency range (ISM) and guarantees broad compatibility
with many WLAN devices.
IEEE 802.11n
This standard allows for high throughput rates and ranges.
The FRITZ!Box supports 802.11n in the 2.4-GHz frequency
band. Modulation processes and antenna techniques like
MIMO (Multiple Input, Multiple Output) use the frequency
band more effectively than the older standards.
Thanks to compatibility with the 802.11g standard, you can
also continue to use older WLAN devices.
Setting the Right Standard in the FRITZ!Box
The throughput rate that can be achieved in your WLAN radio
network depends on the WLAN standards used by the inte-
grated WLAN devices. These WLAN standards must also be
set in the FRITZ!Box. Proceed as follows to check which WLAN
standards are set and change them if needed:
1.
Open the FRITZ!Box user interface.
2.
Enable the advanced view.
3.
Open the “WLAN / Radio Channel” menu and select “Ad-
just radio channel settings” to make the desired chang-
es.
The use of the 802.11n standard—and thus the availability
of higher throughput rates—is possible only if the WLAN con-
nection is secured using the WPA2 security mechanism (AES-
CCMP).
Summary of Contents for 6810 LTE
Page 150: ...FRITZ Box 6810 LTE 150 ...
