6
Using the device
WARNING!
If the grinding elements used are not original accessories,
we assume no guarantee and exclude all liability for
damage to the device or for personal injury.
WARNING!
Make certain before starting the machine that the grinding
elements have been properly installed and locked in place
and that there are not any loose parts inside of the device.
Failure to observe this provision will void the guarantee and
releases us from liability for any resulting damage to the
machine or personal injury.
WARNING!
Wear safety gloves!
The collecting vessel and the grinding elements can become
very hot after grinding. Grinding elements such as rotors,
sieves and the collecting vessel can have sharp edges. For
cleaning wear gloves that are safe and without defect.
To avoid cutting hazards from sieve rings, use sieves with
reinforced edges as standard. These do not have any sharp
metal edges.
CAUTION!
When grinding electrically conductive substances, the fine
dust can be suctioned through the filter on the back side of
the device and cause short circuits. Therefore, when
grinding such substances, work must be carried out espe-
cially carefully and cleanly.
CAUTION!
The device may not be run unsupervised.
Using the device
- 24 -