2.6.1 Opening the hood without mains connection
CAUTION!
The emergency release must not be activated while the
machine is running! Disconnect the machine from the
mains before the emergency release. Failure to observe this
will render void the guarantee, and releases us from lia-
bility for any resulting damage to the device or personal
injury.
2 persons are required for unlocking the PULVERISETTE 14 premium line:
1.
Lift up the back of the device.
2.
Underneath the machine you will see a wire loop in the centre of
the base leading into the device's interior.
3.
Use an Allen key to pull at the wire with a certain amount of force.
4.
The lock of the hood is released and it can now be opened man-
ually.
5.
Put down the device. The emergency release will be reset auto-
matically during the next locking cycle.
2.7 Hazardous points
WARNING!
– Crushing hazard when closing the housing cover!
– Crushing hazard when removing and positioning the
collecting vessel!
– The collecting vessel can become very hot!
– Never operate the device without a sieve ring.
– Cutting hazard at the grinding elements such as rotors,
sieves and collecting vessel. These can have sharp
edges. Sieves with reinforced edges are used to avoid
this hazard. These do not have any sharp metal edges.
– When grinding electrically conductive substances, the
fine dust can be suctioned through the filter on the
back side of the device and cause short circuits. There-
fore, when grinding such substances, work must be car-
ried out especially carefully and cleanly.
Safety information and use
- 15 -