72
For right needle / A jobb tűhöz / K pravej ihle
For left needle / A bal tűhöz / K ľavej ihle
NEEDLE THREADER
1. Feed the thread through the thread guide
of needle clamp as illustrated. Raise
the presser foot. Raise the needle bar
to highest position, and pull the thread
leaving about 4” (10 cm) clear.
2. Lower the presser foot. Set the needle
threader ensuring the hooking fork enters
into the needle hole.
3. Hold the thread with the needle threader
with your hand.
4. Guide the thread into hooking fork and
pull the thread with your another hand.
5. Move the needle threader backwards
slightly. Then release the hand which is
pulling the thread.
6. Take the needle threader off the needle
clamp.
7. Pull the thread away from you.
