Frigomat TAYLOR IC135 Series, Operatinginstructions And Maintenance

Page: 27 / 71

ENGLISH - 26
5.6.3 PRODUCTION OF WATER ICE WITH CONSISTENCY CONTROL (GR1)
The programming of this cycle is based on the
control of the consistency variation, exactly as for the
semiautomatic cycle for ice-cream production.
- Press the “
GRANITA ” button and the display,
which shows GR1 , the “water ice” led and the
“ UP ( ▲ )” – “ CONFIRM ( ◄► )” – “ DOWN ( ▼ )”
buttons light up. At this point the machine si
ready for the selection of the desired water ice
program.
- Press “ CONFIRM ( ◄► )” to confirm the selection
of the GR1 program .
- The display shows the last consistency value set.
Press “
UP ( ▲ )” and “ DOWN ( ▼ )”to respectively
increase and decrease the desired consistency
value (limits from 120 to 180). When the desired
value is reached press “
CONFIRM ( ◄► )” to
memorize the settings and start the cycle. The
recommended value ranges from 140 and 160.
- During the cycle the compressor and the mixer
shall always be running. When the set
consistency has been reached the
“
SEMIAUTOMATIC ” button flashes and an
intermittent beep warns the operator that it is
time to extract the product.
- Press “ MIXING ” and extract the product.
- If the mixture cannot be removed promptly, the
mixer will keep rotating until the consistency
drops by a certain percentage value thus starting
the water ice PRESERVATION phase, which
can be interrupted in any moment directly moving
to the extraction phase.