9 - ENGLISH
•
When the machine is on STOP unlock the door by
lifting the lever and then rotate to the left.
•
Slide out the mixer, check and lubricate the mixer
stuffing box with lubricant (supplied) .
•
The ideal temperature shall range between 15° and
35°C.
•
The ideal humidity shall range between 30 and 60%.
TAYLOR declines any liability for damages to persons and/or things due to a wrong
installation and/or the non-compliance with the industrial accident prevention standards.
Never touch the machine with hands, both when it is on duty and during cleaning and
maintenance operations, without making sure that the machine has been stopped by
means of pushbutton
STOP
and the main switch has been turned off. Never clean the
machine by means of high-pressure jets of water. Never close the cut-off cock while the
machine is running. Pay attention not to damage the power cable: if it is damaged, have it
replaced.
In case the machine provided with water-cooling is left at a room temperature inferior to
0°C, it is necessary to run off all water present inside the condenser before starting up the
machine.
Summary of Contents for TAYLOR IC135 Series
