background image

22

NOTE

When you first power on the refrigerator, 

the temperature displays 0°F and 37°F. After 

a few seconds, both of the displays will 

switch to “HI”. The displays will continue to 

show “HI” for 20 minutes. After 20 minutes, 

the High Temp alarm will sound and both 

displays will show the actual temperature 

and the dispenser control will show “High 

Temp Detected”.

CONTROLS

Alarms

Power Failure

In the event of a power failure, the power fail 

alert will be illuminated. Press “mute alarm” 

to acknowledge the alarm. Other modes may 

be turned off until the alarm is acknowledged. 

While a power failure alert is displayed on the 

control panel, the unit will continue normal 

operation. The power fail alert on the control 

panel will be removed once the user acknowl-

edges the power fail condition by pressing any 

key on the control panel. The high temp alarm 

may also be illuminated until a safe operating 

range temperature has been reached.

Freezer Temp

If the freezer temperature reaches 26°F or 

greater, the alarm will sound and the tem-

perature will flash and the dispenser control 

will display “HIGH TEMP DETECTED”. You can 

disable the alarm by pressing “mute alarm” but 

the “HIGH TEMP DETECTED” indicator will illu-

minate until the temperature goes below 26°F.

Fresh Food Temp

If the fresh food temperature reaches 55°F or 

greater, the alarm will sound and the tem-

perature will flash and the dispenser control 

will display “HIGH TEMP DETECTED”. You can 

disable the alarm by pressing “mute alarm” but 

the “HIGH TEMP DETECTED” indicator will illu-

minate until the temperature goes below 55°F.

Door Ajar

If the freezer or fresh food doors have been 

left open for five minutes or more, an alarm 

will sound and the door ajar indicator will il-

luminate on the display. Press “mute alarm” to 

reset any system alarms.

Flapper

When “CUBES” or “CRUSHED” is selected, if 

the flapper (or ice chute door) is being held 

open by a jammed ice cube, an alarm will 

sound for two minutes and the current selec-

tion will blink on the dispenser control. The 

alarm will reset after two minutes or when the 

ice cube is removed.

FRIGIDAIRE  

PROFESSIONAL

Dispenser Controls  

(options may vary)

WATER

Press the “WATER” key to 

select water. 

CUBES

Press the “CUBES” key to 

select cubed ice. 

CRUSHED

Press the “CRUSHED” key to 

select crushed ice.

         light

Toggles dispenser light on 

and off.

Summary of Contents for FFH17F7HWC













































Reviews: