Frigidaire FFH17F7HWC Page 37 Use & Care Manual Download

Page: 37 / 44

CARE & CLEANING

Care & Cleaning Tips

Part

What To Use

Tips and Precautions

Interior & Door

Liners

• Soap and water
• Baking soda and water

Use two tablespoons of baking soda in one

quart of warm water.

Be sure to wring

excess water out of sponge or cloth

before cleaning around controls, light

bulb or any electrical part.

Door Gaskets

• Soap and water

Wipe gaskets with a clean soft cloth.

Drawers & Bins

• Soap and water

Use a soft cloth to clean drawer runners and

tracks.

Glass Shelves

• Soap and water
• Glass cleaner
•

Mild liquid sprays

Allow glass to warm to room temperature

before immersing in warm water.

Toe Grille

• Soap and water
•

Mild liquid sprays

• Vacuum attachment

Vacuum dust from front of toe grille. Remove

toe grille (see Installation Instructions). Vacuum

backside, wipe with sudsy cloth or sponge.

Rinse and dry.

Exterior &

Handles

• Soap and water
• Non Abrasive Glass

Cleaner

Do not use commercial household cleaners

containing ammonia, bleach or alcohol to clean

handles. Use a soft cloth to clean smooth

handles.

DO NOT use a dry cloth to clean

smooth doors.

Exterior &

Handles
(Stainless Steel

Models Only)

• Soap and water
• Stainless Steel

Cleaners

Never use CHLORIDE or cleaners with

bleach to clean stainless steel.

Clean stainless steel front and handles with

non-abrasive soapy water and a dishcloth.

Rinse with clean water and a soft cloth. Use

a non-abrasive stainless steel cleaner. These

cleaners can be purchased at most home

improvement or major department stores.

Always follow manufacturer’s instructions.

Do not use household cleaners containing

ammonia or bleach.

NOTE: Always clean, wipe and dry with

the grain to prevent scratching.

Wash the

rest of the cabinet with warm water and mild

liquid detergent. Rinse well, and wipe dry with

a clean soft cloth.

Replacing Light

Bulbs

•  Unplug refrigerator
•  Wear gloves
•  Remove light cover
•  Replace old bulb
•  Replace light cover
•  Plug in the refrigerator

CAUTION: Wear gloves when replacing

light bulbs to avoid getting cut.

Use same wattage when replacing bulb.

Summary of Contents for FFH17F7HWC













































Search results

Summary of Contents for FFH17F7HWC

Reviews:

Related manuals for FFH17F7HWC

Brands by name

Popular brands

Frigidaire FFH17F7HWC, Use & Care Manual

Search results

Summary of Contents for FFH17F7HWC

Reviews:

Related manuals for FFH17F7HWC

Brands by name

Popular brands