20
In both cases (manual or automatic blocking) the note “Read in Operator” will
appear in the display. Your FRIAMAT
®
model can be cleared for use by
reading in an operator pass
5.3
Commission Numbers
For simple administration of up to 20 different commission numbers your
FRIAMAT
®
model has a commission number specification menu.
5.3.1 Specifying and saving a commission number
Go into the main menu by pressing the MENU button. Now press the MENU
button as many times as it takes for the “commission no.” setting menu to
appear in the display. To get into the “Change/Specify commission nos.”
setting menu press the START button. By pressing the STOP button you will
go into the specification setting menu in which you can enter and save up to
20 commission nos. If you press the START button the current commission
no. will appear. The first character of the commission no. will flash. This can
be increased by pressing the INFO button or decreased by pressing the
MENU button. With the START / STOP button you can move left or right
within the commission no. With the SET button the commission no. set will be
saved and taken into the Specification Menu, and with the RES button you
can break off the process without saving.
Another method for getting into the “Change/Specify Commission Nos.”
setting menu is to read in the COMMISSION CODE (see plastic card in the
accessories pouch).
Commission No.
12 Dossenheimer Way
Commission No.
New
Selection
Delete
Commission No.
Change
Specification
