13
3.4
Setting the language
Go into the main menu by pressing the MENU button. Now press the MENU
button as many times as it takes for the “
*
Language
*
” setting menu to
appear in the display (Meaning of the star : See IMPORTANT note in this
section). To set the language press the START button. “
*
Language
*
” will
appear in the top line of the display, whilst the actual language set will appear
in the bottom line. Two stars will flash on the right and left to show that you
are in the language setting menu. To change the language select the language
you require with the INFO / MENU button. Press the SET button to end and
save the settings. You can press the RES button to end without saving. Press
the STOP button at the end to end the menu selection.
Signal volume
loud
quiet
IMPORTANT ! The setting of the language only refers to the one shown
in the display. The language of the documentation
(Report) remains English
IMPORTANT ! In the language setting menu two stars appear, left and
right, in the upper line. These are used to allow the
language setting menu to be recognised when for
example the language has accidentally been set wrongly.
* Language *
* German *
* Language *
yes
continue
End
Signal volume
yes
continue
End
