With the system switched off, press the button.
The Power LED and Water Pump LED light up.
The fan and water pump starts.
If you wish for the unit to operate without the water press the button to turn the
water pump off.
To increase or decrease the airflow press the button.
To turn the interior light on or off press the button.
Park your vehicle in the shade when possible.
If you leave your vehicle and your unit is in off mode and the vehicle is not ventilated,
make sure to open a window, door, or vent when you return in order to release hot
air and more quickly introduce cool air.
Select a suitable fan speed by increasing or decreasing the speed until the desired
speed is achieved.
Use the any or all of the 4 directional vents to point the airflow to the desired areas.
Ensure water reservoir is full.
The water pump automatically turns on when the unit is turned on provided there is
water present in the reservoir.
Keep the water pump on for maximum cooling performance.
The best cooling capacity is achieved when the fan is at maximum speed, the pump
is on and the directional vents are directed toward you.
© Fresair, LLC.
Fresair.com
9 of 21
Operation Information
NOTICE!
The manufacturer assumes no liability for non-observance of this
operating manual, in particular for any consequential damage(s),
especially consequential damage(s) caused by failure of the Fresair Air
Cooling unit. Do not insert foreign objects into the system.
It is recommended that you:
Observe the following instructions to ensure your Fresair Air Cooling Unit is used
properly and efficiently.
Operation
