background image

© Fresair, LLC. 

Fresair.com

10 of 21

Warranty Information

The warranty period begins on the purchase date and ends 12 months from the purchase

date with exceptions to certain replacement parts as outlined in the manual. 

If the product is defective, please contact the dealer you purchased from or contact Fresair

directly by emailing [email protected]. For repair and warranty processing, please

include a copy of the receipt with purchase date and a reason for the claim and/or

description of the fault.

In no case will Fresair exchange the product for a replacement solely due to a defective

component. 

NOTICE!

If kept in off mode for an extended period of time, there may be an odor when

turning it on again as a result of the absence of water cycling through the

straw filter. You may remedy this by running a few cycles and the odor will

naturally subside.

NOTICE!

This model has exclusive application for on road uses. We do not recommend

extreme off road uses at this time.

A. Damages caused by accidents; 

B. Plastic items: superior cover in ABS plastic, main panel, finishing frame and base; 

C. Electric harness or hoses cut or damaged; 

D. Control panel with any sign of modification or use with other brand; 

E. Fan with broken or damaged airscrew or with normal brush wear and tear; 

F. Air filter obstructed by dirt or dust; 

G. Any component in which the label with the date of manufacture is removed or not

legible; 

H. Use of unauthorized parts, unauthorized modifications, or unauthorized repairs made by

technicians or individuals who are not licensed or not qualified to modify or repair Fresair

units; 

I. Off road application; 

J. Unsatisfactory product performance due to improper installation; 

K. Damage caused by unexpected circumstances (ex: accident, fall, wear and tear, violent

weather conditions, use of chemical abrasive products inside and outside the product,

etc.); 

L. If the product is switched on at a different voltage than it was intended for; 

M. Removal of and/or modification of the serial number or the product identification label. 

NOTICE!

Never add anti-freeze, softener, perfume, fragrance or any other substance

than pure water in the reservoir. Adding substances could create foam or

potentially cause leaks. 

Summary of Contents for S7i






















Reviews: