© Fresair, LLC.
Fresair.com
18 of 21
How to Install
Main Electrical
Harness
fuse block
positive
wire
negative
wire
Float Sensor &
Injection Harnesses
Electrical Diagram
Figure 2
Step 6 - Electrical
What you’ll need:
Please remember to take any safety precautions when working with electrical wire.
We recommend disconnecting the main power supply until the wires are
connected for safety purposes.
Run the electrical wiring from the unit to the 12V DC fuse block ensuring it is
completely concealed so that the wire is not exposed to elements or incidental
damage.
Connect the positive wire (red) to the positive terminal of your fuse block.
Connect the negative wire (black) to the negative terminal of your fuse block.
Ensure both wire connections are tightened properly and completely secured to the
fuse block.
Next, test the power (using the Fresair power button on the unit) to ensure your unit
turns on.
Supplied Electrical Wiring, *Screwdriver
