© Fresair, LLC.
Fresair.com
15 of 21
How to Install
Prep Tip: In order to keep the vehicle free from debris, we recommend temporarily
securing a plastic drop cloth around the cutout area inside the vehicle so that debris
will land inside of the drop cloth and not in your vehicle.
What you’ll need:
Angle Grinder/Jigsaw (Cordless tools are strongly recommended),
File, Sealant/Anti-Rust Paint, *Plastic Drop Cloth, *Safety Glasses
Make sure to wear appropriate safety gear to protect yourself from sparks, metal
ricochet, etc. such as safety glasses, gloves, long sleeves, etc.
Cut the opening of 14.5” wide (side to side of roof) by 13” tall (front to back of roof)
along the outline as closely as possible.
File any newly cut edges and ensure edges are smooth to the touch.
Seal the newly cut edges with anti-rust paint or sealant and allow to dry for the
recommended time.
Clean away any remaining debris from the roof to prevent rust.
Step 2 - Cutting the Opening for the Fresair Unit
Step 3 - Testing the Fit
What you’ll need:
Fresair Unit
Test the fit of the Fresair Unit by first detaching the mounting bracket and lowering
it in the area you’ve just cut out and make any necessary adjustments accordingly.
Be careful not to crimp or damage the water hoses.
