USER ERROR LIST
31 March, 1999
7-8
7.2 USER
ERROR
LIST
Error
Operation after
error
Detection
conditions
Release method
Remarks
Add Toner: xx
Printing can be
done.
Toner near-end
detection is enabled
two seconds after
the development
drive solenoid turns
on until it turns off.
The toner near-end
message is
displayed when
toner end is
detected five times.
Replace the DTM.
When near-end is
detected, closing the
front cover initiates
recovery. If the toner
near-end status is
cleared, it is not
detected during
recovery. In single-
color (black-and-
white) continuous
output, toner near-
end is detected
during process
control.
Load
xx
(By-pass feed
table)
Printing is disabled
when the by-pass
paper feed table is
specified. If paper
end is detected for
the second image
in double-image
mode, the printer
stops after the first
sheet is printed.
Paper end is
detected by the by-
pass feed paper end
sensor.
Supply paper.
Double-image mode:
Two images on the
transfer belt at the
same time.
Load
xx
(Tray 1)
Printing is disabled
when the paper
tray is specified. If
paper end is
detected for the
second image of
the double-image
mode, the printer
stops after the first
sheet is printed.
Paper end is
detected by the
paper end sensor of
the first paper tray.
Supply paper.
Load
xx
(Tray 2)
Printing is disabled
when the second
paper tray is
specified. If paper
end is detected for
the second image
of the double-
image mode, the
printer stops after
the first sheet is
printed.
Paper end is
detected by the
paper end sensor of
the second paper
tray.
Supply paper.
Load
xx
(Tray 3)
Printing is disabled
when the third
paper tray is
specified. If paper
end is detected for
the second image
in double-image
mode, the printer
stops after printing
the first sheet.
Paper end is
detected by the
paper end sensor of
the third paper tray.
Supply paper.
