
ENGINE SP MODE
31 March, 1999
4-14
4.2.14 HIGHLIGHT ADJUSTMENT
Use this menu to adjust the density in high-light (low ID) areas for each of Y, C, M,
and K. This adjusts the grid bias.
After adjusting this setting, do a forced process control (engine SP mode 7,
Process Contrl – Normal, or Initialize) to make the new setting come into effect.
Layer 1
Layer 2
Layer 3
Layer 4
Hi-light adj
cyan
cyan
1 to 7
Hi-light adj
magenta
Same as cyan
Hi-light adj
yellow
Same as cyan
Maintenance
12:Hi-light adj
Hi-light adj
black
Same as cyan
4.2.15 LUB_INTERVAL (BELT LUBRICATION INTERVAL
ADJUSTMENT)
The belt lubrication interval is adjustable.
The counter for this interval increases by one for each transfer belt revolution.
(e.g. It increases by 4 with A3/DLT full color printing and by 1 in monochrome
mode.)
The default value is 100 transfer belt revolutions.
This mode is helpful when insufficient toner is transferred to the printout, especially
on text and/or line images. This can occur when a machine is used heavily. (The
expected job size for this model is 5 sheets per job on average).In this case,
making the interval shorter solves this problem.
NOTE: This value should not be set to 0 because no lubrication is done with this
value. The recommended value is between 50 to 100 for optimum machine
performance.
Layer 1
Layer 2
Layer 3
Layer 4
Maintenance
13:Lub_Interval
M Interval
XXX