ENGINE SP MODE
31 March, 1999
4-8
Sensor Name
Sensor Status
Name
Display
0
1
Transfer Roller
Position Sensor
Tfr Position
Release
Touch
Pull-out Sensor
(Tray 2)
P Feed-2nd
Paper not detected
Paper detected
Pull-out Sensor
(Tray 3)
P Feed-3rd
Paper not detected
Paper detected
ID Sensor
ID
*3
*3
Humidity
*4
*4
Temperature/Humidity
Sensor
Temp
*5
*5
DTM Cover Switch
Cvr Opn-S
Open
Closed
Pull-out Sensor (Main
Body)
Picup
Paper detected
Paper not detected
Charger Corona Set
Switch
Main Charger
Detected
Not detected
*1: “Paper size detection” in Section 2 explains the status of the paper size
switches for paper size detection. (0: Pressed, 1: Not pressed)
*2: The table below shows the correspondence between the paper guide positions
and displayed values.
Guide position
A3W
A3/A4
B4/B5
A5
B6
A6
Display
20
04
22
12
0b
0b
Guide position
12
11
10½
8½
8¼
8
Display
20
04
22
12
12
12
*3: The displayed value indicates the K sensor output when the LED in the ID
sensor is turned on. The specified output value (reference for normal
operation) is 2.7
±
0.8 V.
*4: The detection results are shown in the XXX YYY format. XXX indicates
absolute humidity, and YYY indicates relative humidity. (Reference for normal
operation: YYY should be between 5 and 95.)
*5: The displayed value indicates the detected temperature. (Reference for normal
operation: Between 8 and 42)
