FRENCH FITNESS MSC10, Owner'S Manual

Page: 20 / 54

STEP 10 (See Diagram 10)
A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting
Sleeve (#23) in between the two Safety Stop Frames (#25). Align the holes. Insert the
Weight Bar (#28) into the Safety Stop Frame from one end and through the Lifting
Sleeve (#23) to the other Safety Stop Frame on the opposite side. Secure the Weight
Bar to each Safety Stop Frame with a Allen Bolt M8×10 (#99).
B.) Turn the safety catch hook forward on the Lifting Sleeve to secure its position onto the
selected teeth on the Side Rack (#40). Attach a Long Olympic Sleeve (#59) to each end
of the Weight Bar. Attach a Spring Clip (#55) to the Sleeve.
C.) Attach eight Weight Posts (#24) to the Left & Right Vertical Frames (#3&4). Secure
each Weight Post with one Hex Bolt M10×20 (#95) and one Washer φ 10 (#103).
D.) Attach eight Olympic Sleeves (#58) to the Weight Posts. Attach Spring Clips (#55) to the
sleeves. Insert the Left & Right Bar Holders (#21 & 22) into the selected holes on the
Front Vertical Frame (#1).
DIAGRAM 10
23
25 99
4 28
25
23
40
22
3
28
24
58
95
103
21
40
59
55
19