FRENCH FITNESS MSC10, Owner'S Manual

Page: 19 / 54

STEP 9 (See Diagram
9
& Cable Loop Diagram)
A.) Attach the Lower Cable 1480 (#48) to a Pulley (#50). Attach the Pulley to the lower
opening on the Rear Support Frame (#16). Secure it with the one Hex Bolt M10×65
(#91), two Pulley Bushings (#66), and one Nut M10 (#108).
B.) Draw the Cable underneath the Pulley to the rear opening bracket on the Rear Support
Frame (#16).
C.) Install a Pulley to the opening. Draw the Cable around the Pulley then upward to the
Double Floating Pulley Bracket (#34) previously installed in Step-8.
D.) Install a Small Pulley (#51) to the Bracket. Draw the Cable around the Pulley then
downward to the open bracket on the Weight Glide Post (#20). Secure the end of the
Cable to the bracket with one Hex Bolt (#94), two Washers
φ 10 (#103), and one Nut
M10 (#108).
E.) Connect the Shiver Bar (#31) to a Long Chain (#54) with a Hook (#52). Connect the long
Chain to the Cable with another Hook.
DIAGRAM 9
103
34
103
92
108
51
48
20
94
103
103
108
16
82
66
108
35
54
52
31
18