Freggia DWCI 6159, User Manual

Page: 11 / 58

GB
11
LOADING YOUR DISHWASHER
LOADING YOUR DISHWASHER
• TOP BASKET HEIGHT ADJUSTMENT WHILE IT IS FULL
Basket height adjustment mechanism on the top basket of your machine is designed
to let you adjust the height of your top basket upwards or downwards, without
removing it from your machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your machine is set to upper
position in factory settings.
In order to raise your basket, hold it from both sides and pull it upwards. In order to
lower it, hold it from both sides again, and leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same
position (up or down).
LOWER BASKET
• FOLDING RACKS
Folding racks consisting of four parts that are located on the lower basket of your
machine are designed in order to let you place big items easier such as pots, pans,
etc. If requested, each part can be folded separately, or all of them can be folded and
larger spaces can be obtained.
You can use folding racks by raising them upwards, or by folding.
Because it can easily be taken out of the machine, it allows your dishes to be taken
out of the machine along with the basket after washing.
• UPPER CUTLERY BASKET
The upper cutlery basket is designed for you to place forks, spoons and knives, long
dippers and small items.
ALTERNATVE BASKET LOADS
• LOWER BASKET
• TOP BASKET
• FAULTY LOADS
The Upper Cutlery Basket is composed of two pieces; if you need to make space for
the dishes in the upper basket, you can take out the left or right part of the upper
cutlery basket in order to obtain more space.
Warning: Knives and other sharp objects must be placed horizontally in
the cutlery basket.
• IMPORTANT NOTE FOR TEST LABORATORIES
For detailed information on performance tests, please contact following address:
«dishwasher@standardtest.info” . In your email, please provide the model name and
serial number (20 digits) which you can find on the appliance door.