R
Reattach the wings to the fuselage and test the
flaps.
Changing from
High Wing To Low Wing Configuration
Locate the parts as shown in the photo.
Remove the wing
assembly from the fuselage,
ensuring that the flap and aileron 'Y' cables are
unplugged fro
m
the receiver.
Remove the four screws holding the wings to the
center section and slide the wings back.
Disconnect the 'Y' harness(es) from the servo
wires and completely remove the wing from the
center section
Take the low wing center section and slide the
wires through the holes, then slide the carbon fiber
rods into their holes.
Anchor the wings to the center section with the four
screws.
Join the two aileron (and flap, if installed)cables
with the 'Y' harness, just like in the high wing
configuration.
