FREEWAY S180E Mobile Hoist, User Manual

Page: 10 / 40

999367 – Revision B P a g e | 10 of 40
3.3 Hoist Assembly
A. Carefully open the box and remove all loose parts and excess packaging from
the box.
2 person lift recommended for the following points.
B. Carefully holding onto the handle and boom, lift the Hoist components out of
the box. Place carefully onto the floor.
C. With one person lifting up from the front castors and one person lifting up
from the rear castors, raise the base from the box and place the Hoist base on
a flat surface and ensure the rear braked castors are locked.
D. Remove the Star Handle and bolt from the top of the base (as shown in Fig. 3).
E. Ensure all cables are clear from entrapment while fitting the base and mast
together. (As shown in Fig. 4).
Please ensure both hands are on the handles when lifting the mast into
position, possible risk of finger trap.
F. When the mast if fully engaged with the base, fit and fully tighten the Star
Handle and Bolt. (As shown in Fig. 5 and 6).
Ensure the mast is fully seated into the base and the Star Handle is in
position and tight before using the Hoist.
NOTE: To disassemble the Hoist into the two main sections (Mast/boom and Base)
simply follow the previous steps in reverse.
Figure 3
Figure 4
Figure 5
Figure 6