999367 – Revision B
P a g e
|
16 of 40
5.8
Control Box Display
The Table below provides information on all Symbols seen on the Control Box display and what they represent. Refer to this
table when unsure of a Symbol displayed on the Control Box.
5.8.1
Service Information read-out:
Basic service information can be read out on the display. To display the service information on the display press the lifting arm
up button (Only for ½ second press). The information (below) will be shown for ½ minute or until other buttons are activated.
If “No Days” are chosen for service internal then the display will show Days since last service.
Control
Box
Feature
Symbol
Comment
Charging of battery
When the mains cable is plugged in and a control button is activated
the symbol to the left is shown on the display until power down 2
minutes later. The purpose if the symbol is to inform the user that it
is not possible to use the lift when it is plugged into the mains.
Short Circuit
If there is a short circuit, the control box will show the short circuit
symbol with a recommendation to check the connections. This
symbol will be shown until the short circuit has been repaired.
Service
The control box will show the service symbol when it is time for
service. The standard settings is after 12 months/8000 cycles. After
each power down, first time that the symbol (100 milli-seconds) so
that the user gets a reminder about checking the display.
The 'SERVICE' Text will blink 3 times, then a static service symbol will
be shown (10 seconds in total). Even though it is time for service the
system will still be functional and work as normal.
Overload channel 1
only:
When Overload occurs (according to the pre-defined current cut-off
limit) the overload symbol will be shown on the display. The 'MAX.
Text will blink 3 times and the overload symbol will be shown for 10
seconds in total.
Table 6
Summary of Contents for S180E Mobile Hoist
