User Manual
5395 Pearl Parkway, Boulder, CO 80301 | [email protected] | 866.923.6168 | www.freewave.com
Omni-directional Antennas
The 900MHz radio is approved by the FCC for use with omni-directional antennas with a 10.5dBi gain or less.
900MHz Omni-Directional Antennas
Alternative Antennas
Antennas other than those listed in this section can potentially be used with the FUSION-BR-WZ with provisions.
• The antennas must be of a similar type.
• The antenna gain CANNOT exceed 10.5dBi for Omni-directional.
• The antenna gain CANNOT exceed 16.0dBi for Directional antennas.
• The overall system EIRP does not exceed 36dBm.
Warning! A proper combination with the FUSION-BR-WZ is required to ensure the system meets FCC requirements.
Intertek and Safety Notification
FUSION-BR-WZ a recognized component under Intertek File Numbers:
Control # 5019876
Report # 104544854CRT-001
Standards and Editions
HazLoc Standards
UL 121201-2019
CSA C22.2 No. 213-17
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified)
Locations – Edition 3 Revision Date 2019/08/26
Ordinary Location Standards
UL 60950, 2nd Edition
CAN / CSA-C22.2 No. 60950, 2nd Edition
IEC 60950, 2nd Edition
EN 60950, 2nd Edition
Power Source
FUSION-BR-WZ is intended to be operated from a Limited Power Source (LPS) or Class 2 power source in accordance with
IEC/EN/UL 60950-1 and CAN/CSA C22.2 No. 60950-1-07.
The FUSION-BR-WZ is approved to operate with an input voltage range of +6 to +30 VDC, 14W, Tmra of 85°C.
