Quickstart Guide
5395 Pearl Parkway, Boulder, CO 80301 | [email protected] | 866.923.6168 | www.freewave.com
Navigate to the configuration page
Once the device is powered, the next step is to navigate
to the configuration page using a browser and begin
configuring the radios. There are two options for connecting
to the radio for configuration: physically through the USB-C
connection, or wirelessly by connecting to the FusionWiFi
Access Point:
Connection Option 1: USB-C
1. Plug in a USB-C cable to the device, and connect the
other end to your computer OR
Connection Option 2: Wi-Fi
2. Find the “FusionWiFi” network in your Wi-Fi settings on
your device and connect to it as your Wi-Fi AP.
Certificate Installation
Because the Fusion configuration site uses the secure
https:// URL, one must first install the Fusion security
certificate. This is located on the device and can be
downloaded directly in a browser:
1. Navigate to
https://192.168.1.150/freewave.crt
2. The browser should automatically begin downloading
the certificate from the Fusion device
3. Once the certificate has downloaded, open the
Downloads folder, right click on the freewave.crt file,
and select “Install Certificate”
4. The certificate will now be installed, click through
the install wizard with the default selections on each
screen, then click “Finish”. The certificate is now
installed and your browser will now recognize the
Fusion device.
