User Manual
5395 Pearl Parkway, Boulder, CO 80301 | [email protected] | 866.923.6168 | www.freewave.com
ISED Notifications
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. CAN ICES-3 (A)/NMB-3(A)
Ce dispositif est conforme aux normes permis-exemptes du Canada RSS d’industrie. L’opération est sujette aux deux
conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence, et (2) ce dispositif doit accepter n’importe quelle
interférence, y compris l’interférence qui peut causer le fonctionnement peu désiré du dispositif. CAN ICES-3 (A)/NMB-3(A)
ISED Host Installation and Label
The content of this documentation covers FreeWave Technologies, Inc. models sold under IC: 2329B-PMT0101AB and
the Silex WiFi/Bluetooth module solder under IC: 4908A-SXPCEAC2. All devices have been tested and comply under
the colocation ISED - SDoC. When any FreeWave Technologies, Inc. module is placed inside a Host, a label must be
placed on the outside of the Host. The label must include the text “Contains IC: 2329B-PMT0101AB” and “Contains IC:
4908A-SXPCEAC2”.
Professional Installation
All models sold under the listed IC ID must be professionally installed.
ISED Radiation Exposure Statement
This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits specified by Health
Canada Safety Code 6. The system must be installed at a minimum separation distance from the antenna to a general
bystander of 20.5 inches (52cm) to maintain compliance with the General Population limits.
L’exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée conforme aux limites
établies par le Code de sécurité 6 de Santé Canada. Le système doit être installé à une distance minimale de 20.5 pouces
(52cm) séparant l’antenne d’une personne présente en conformité avec les limites permises d’exposition du grand public.
Only FCC and IC approved antennas may be used.
The antenna must be professionally installed on a fixed, mounted, and permanent outdoor structure to satisfy RF exposure
requirements.
Any antenna placed outdoors must be properly grounded.
Use extreme caution when installing antennas and follow all instructions included with the antenna.
Approved Antennas
Yagi Directional Antennas
The 900MHz radio is approved by the FCC for use with directional antennas with a 10.5 dBi gain or less.
900MHz Yagi Directional Antennas
