Quickstart
Guide
5395 Pearl Parkway, Boulder, CO 80301 | [email protected] | 866.923.6168 | www.freewave.com
The FreeWave Fusion Wi-Fi Bridge is
designed to create a seamless Wi-Fi access
point (AP) anywhere on a ZumLink network.
This allows Wi-Fi devices and sensors to be
connected in remote and rugged locations, without
extra wiring or special networking.
This guide will walk you through the first-time setup and
configuration of the Fusion Wi-Fi Bridge, connecting the device to a ZumLink network
and introducing the device’s Wi-Fi parameters and functionality.
This guide assumes a level of familiarity with ZumLink networks. If information about
setting up a ZumLink network is required, please visit
https://www.freewave.com/gettingstartedwithzum/
You Will Need
1. A computer running Windows with an available USB port
2. A FreeWave ZumLink 900MHz system or gateway to which the Fusion device can connect as an endpoint
Kit Contents
1. Fusion Wifi Bridge
a. 900MHz SMA antenna (long antenna)
b. 2xDual-band Wifi antenna (short antenna)
c. Fusion power supply, terminated
Purpose of this guide
This document will guide the setup and installation of a Fusion Wi-Fi Bridge endpoint on a ZumLink network.
By the end of this guide, we will have created a Wi-Fi AP that allows the user to connect Wi-Fi devices to a
ZumLink network, as pictured below.
FreeWave Fusion
