Mainboard User’s Manual
PnP/PCI Configuration
62
ACPI Suspend Type : Use this item to define how your system
suspends. If set to S1(POS) (default), the suspend mode is equivalent
to a software power down. If set to S3(STR), the suspend mode is a
suspend to RAM the system shuts down with the exception of a
refresh current to the system memory.
Run VGABIOS if S3 Resume : The options are “Auto”,
“Yes”, “No”. This item sets to run VGA BIOS when S3
Resume.
Power Management : This item acts like a master switch for the
power-saving modes and hard disk timeouts. If this item is set to Max
Saving, power-saving modes occur after a short timeout. If this item
is set to Min Saving, power-saving modes occur after a longer
time-out. If the item is set to User Define, you can insert your own
timeouts for the power-saving modes. There are four options:
User Define: allows you to customize all power saving timer
features
Max Saving: recommended setting for general use
Min Saving: sets power saving at minimum values
Video Off Method : This setting controls the video off method in
power saving mode. The setting “V/H SYNC+Blank” disables V/H
SYNC signals and blanks the screen. Other options are “DPMS” and
“Blank Screen.” The “DPMS” option allows the BIOS to control the
video card if it has the DPMS (Display Power Management System)
feature. The “Blank Screen” option is used when you do not have a
“Green” monitor.
Video Off In Suspend : Set this to “Yes ” (default) if you want the
Video display to turn off during suspend mode.
Suspend Type : Enables you to select the Suspend type. Options are
“Stop Grant” (default) and “PwrOn Suspend.”
