Mainboard User’s Manual
36
IDE
HDD Auto Detection
•
EGA/VGA (default)
•
MONO
•
CGA 40
•
CGA 80
Halt On:
This setting determines which type of errors will cause the
system to halt during bootup. The options are:
•
All Errors (default)
•
No Errors
•
All, But Keyboard
•
All, But Diskette
•
All, But Disk/Key
After you have made your selections in the Standard CMOS Setup
screen, press <ESC> to go back to the main screen.
4.3. IDE HDD Auto Detection
If your system has an IDE hard drive, you can use this utility to de-
tect its parameters and enter them into the Standard CMOS Setup
automatically.
If the auto-detected parameters displayed do not match the ones that
should be used for your hard drive, do not accept them. Press the
<N> key to reject the values and enter the correct ones manually in
the Standard CMOS Setup screen.
Note: If you are setting up a new hard disk drive that supports
LBA mode, more than one line will appear in the parameter
box. Choose the line that lists
LBA
for an LBA drive.
Do not choose “Large” or “Normal” if the hard disk drive is already
fully formatted when you installed it. Select the mode that was used
to format it.
Summary of Contents for P5F113
Page 1: ...P5F113 Mainboard Manual Friday March 02 2001 ...
Page 2: ......
