50
P5F97/P5F103 User’s Manual
Standby Mode:
Options are from “1 Min” to “1 Hour” and “Dis-
abled”. The system speed will change from turbo to slow and the
video signals will be suspended if no Power Management events
occur for a
specified length of time. Full power function will return when a
Power Management event is detected. When system entering Standby
Mode the STB LED will start blinking twice a second, indicates your
system at Standby Mode.
Suspend Mode:
Options are from “1 Min” to “1 Hour” and “Dis-
abled”. The CPU clock will be stopped and the video signal will be
suspended if no Power Management events occur for a specified
length of time. Full power function will return when a Power Man-
agement event is detected. When system entering Suspend Mode the
STB LED will stop blinking and stay on, indicates your system at
Suspend Mode.
HDD Power Down:
Options are from “1 Min” to “15 Min” and “Dis-
abled”. The IDE hard drive will spin down if it is not accessed within
a specified length of time.
PM Events (Primary HDD/Floppy/COM Ports/Keyboard/LPT
Ports):
When a PM event (Primary HDD/Floppy/COM port/
Keyboard/LPT ports) is enabled, the occurrence of a corresponding
event will reload global timer to prevent the system from entering
any Power Management mode.
PWR-BTTN:
The options are “Disabled”, “Green Mode” and
“Power-off.”. When set to “Power-off”, pressing the power button
will turn off the system power. When set to “Disabled.”, you have to
press the power button and hold it for more than 4 seconds to turn
off the system power. When set to “Green Mode”, pressing the
power button will force your system entering suspend mode which
will turn off CPU FAN and HDD spin if there are no PM Events
active.
Note: During the booting process, the power button is
ignored. The default setting is “Disabled”.
Chapter 3: BIOS Configuration
