P5F97/P5F103 User’s Manual
23
The front panel on your case may have a turbo switch to deactivate the
Turbo mode when a slower speed is required for a specific application. The
ALi Aladdin V chipset does not support the hardware deturbo function. An
alternative method of using <CTRL><ALT><+/-> keys to change the speed
may be used if necessary.
Chapter 2:Hardware Installation
HDD LED Connector
Pin Assignment
1. LED Anode
2. LED Cathode
Reset Connector
Pin Assignment
1. Power Good
2. Ground
1
1
This 2-pin connector connects to the case-mounted HDD LED to
indicate hard disk activity.
This 2-pin connector connects to the case-mounted reset switch and
is used to reboot the system.
STB LED Connector
Pin Assignment
1. LED Cathode
2. LED Anode (Ground)
1
This 2-pin connector connects to the case-mounted STB LED to indicate
Power Switch Connector
Pin Assignment
1. Power On/Off
2. Ground
1
This 2-pin connector connects to the case-mounted Power button.
a standby status.
Pin Assignment
1. LED Cathode
2. N. C.
3. LED Anode (Ground)
4. KEYLOCK
5. Ground
Power LED & Keylock
1
This 5-pin connector connects to the case-mounted keylock switch and
the power LED.
