TM
Freescale Semiconductor Confidential and Proprietary Information. Freescale™ and the Freescale logo are trademarks of Freescale
Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2005.
Slide 17
MCS08QG8 Demo Kit
Run Test Program
1. Check the jumper settings and make sure they are in the default position.
Use Figure 1 as a guide.
2. Connect the USB cable to the PC and then to the board. If you are using
this board for the first time, please follow the instructions on the screen to
install the USB device properly. (If you have not installed CW 3.1 and the
service pack, you will not have the proper files used to recognize the Demo
Board.)
3. After the USB drivers are installed correctly, the USB, USB PWR OUT, and
VDD LEDs will be on.
4. Press SW1 and LED1 will toggle.
5. LED2 will blink at a fast rate.
