9
• To hire an authorized service technician to
assemble the treadmill, call 1-800-999-3756.
•
Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials, except for the packing materi
-
als on the upright. Do not dispose of the packing
materials until you finish all assembly steps.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 8.
•
Assembly requires the following tools:
the included hex keys
an adjustable wrench
To avoid damaging parts, do not use power tools.
ASSEMBLY
2.
Make sure that the power cord is unplugged.
Also, make sure to assemble the treadmill in
the location where it will be used.
If there is a
strap around the treadmill, remove it.
With the help of a second person, hold the
Uprights (96) securely and remove the packing
materials (A)
at the same time.
Then, carefully raise the Uprights (96) into the
vertical position so that the base of the Uprights
rests flat on the floor.
Be careful not to pinch
the power cord.
2
96
A
A
Base
1.
Go to www.iconservice.com/registration on
your computer and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Care (see the back cover of this
manual) and register your product.
1
Summary of Contents for t 6.4
Page 5: ...5 ...
