11
6. With the help of a second person, hold the con-
sole assembly (D) near the Uprights (96).
See the inset drawing.
Connect the Upright
Wire (92) to the console wire.
The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, connect the pulse wires (E).
Make sure to
connect the pulse wires on the right side (not
shown) also.
D
96
6
E
92
92
Console
Wire
5. Cut the tie securing the Upright Wire (92).
Identify the left handrail assembly (B). Hold the
left handrail assembly near the left Upright (96).
Insert the Upright Wire (92) through the opening
in the bottom of the left handrail assembly.
See the inset drawing.
Press the left handrail
assembly (B) onto the left Upright (96).
Be care-
ful not to pinch the Upright Wire (92).
Make
sure that the Upright Wire is resting in the slot at
the top of the left Upright.
Attach the left handrail assembly (B) with two
3/8" x 3 1/4" Screws (2) and two 3/8" Star
Washers (3).
Attach the right handrail assembly (C) to the
right Upright (96) in the same way.
Note: There
is no wire on the right side.
96
B
Slot
5
C
B
3
2
2
3
96
92
Slot
92
Summary of Contents for t 6.4
Page 5: ...5 ...
