Freemotion t 6.4 User Manual Download

Page: 27 / 40

3. Update the console firmware.

For the best results, regularly check for firm-

ware updates.

Touch the Firmware Update button to check for

firmware updates using your wireless network. The

update will begin automatically.

To avoid damaging the treadmill, do not turn off

the power or remove the key while the firmware

is being updated.

The screen will show the progress of the update.

When the update is complete, the treadmill will turn

off and then turn back on. If it does not, press the

power switch into the off position. Wait for several

seconds, and then press the power switch into the

reset position. Note: It may take a few minutes for

the console to be ready for use.

Note: Occasionally, a firmware update may cause

your console to function slightly differently. These

updates are always designed to improve your exer

cise experience.

4. Calibrate the incline system of the treadmill.

Touch the Calibrate Incline button. Then, touch

the Begin button to calibrate the incline system.

The treadmill will automatically rise to the maxi

mum incline level, lower to the minimum incline

level, and then return to the starting position. This

will calibrate the incline system. Press the Cancel

button to return to the maintenance mode. When

the incline system is calibrated, touch the Finish

button.

IMPORTANT: Keep pets, feet, and other objects

away from the treadmill while the incline sys-

tem is calibrating. In an emergency, pull the key

from the console to stop the incline calibration.

5. View machine information.

Touch the Machine Info button to view information

about your treadmill. After you view the information,

touch the back button on the screen.

6. Find keycodes.

The Keycodes button is intended to be used by

service technicians to identify whether a certain

button is working correctly.

7. Exit the maintenance mode.

To exit the maintenance mode, touch the back but

ton on the screen.

HOW TO USE THE WIRELESS NETWORK MODE

The console features a wireless network mode that

allows you to set up a wireless network connection.

1. Select the settings main menu.

See step 1 on page 25.

2. Select the wireless network mode.

In the settings main menu, touch the Wireless

Network button to enter the wireless network mode.

3. Enable Wi-Fi.

Make sure that the Wi-Fi checkbox is marked with

a green checkmark. If it is not, touch the Wi-Fi

menu option once and wait for a few seconds. The

console will search for available wireless networks.

4. Set up and manage a wireless network

connection.

When Wi-Fi is enabled, the screen will show a list

of available networks. Note: It may take several

seconds for the list of wireless networks to appear.

Make sure that the checkbox on the Network

notification menu option is marked with a green

checkmark to have the console notify you when a

wireless network is within range and available.

Note: You must have your own wireless network

and an 802.11b/g/n router with SSID broadcast

enabled (hidden networks are not supported).

Summary of Contents for t 6.4









































Search results

Summary of Contents for t 6.4

Reviews:

Related manuals for t 6.4

Brands by name

Popular brands

Freemotion t 6.4, User Manual

Search results

Summary of Contents for t 6.4

Reviews:

Related manuals for t 6.4

Brands by name

Popular brands