9
5. Have a second person hold the Handrail Cage
(154) near the Handrail (100). Connect the 73"
Pulse Wire (167) to the 35" Pulse Wire (161).
See the inset drawing in step 1. The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again.
IF THE CONNECTORS ARE
NOT INSERTED PROPERLY, THE CONSOLE
MAY BE DAMAGED WHEN THE POWER IS
TURNED ON.
Attach the Handrail Cage (154) to the Handrail
(100) with four 5/16" x 2 1/2" Bolts (141) and
eight 5/16" Star Washers (166).
Be careful not
to pinch the wires.
141
166
100
167
154
141
166
161
5
4.
The Upright Brackets (98, 99) may be preat-
tached. If they are not, complete this step.
Insert the TV/audio cables through the Left
Upright Bracket (99). Press the Left Upright
Bracket onto the left Upright (96).
Be careful
not to pinch the wires.
Insert the 55" Wire Harness (48) through the
Right Upright Bracket (98). Press the Right
Upright Bracket onto the right Upright (96).
Be
careful not to pinch the Wire Harness.
Attach the Upright Brackets (98, 99) with four
3/8" x 2" Bolts (3) and four 3/8" Star Washers (9).
99
3
9
3
98
9
96
48
4
3.
The Wheels (91) may be preattached. If they
are not, complete this step.
With the help of a second person, carefully raise
the Uprights (96) and insert a Wheel (91) into
the bottom of each Upright.
Attach each Wheel (91) with a 3/8" x 2 1/2"
Wheel Bolt (34), a 3/8" Wheel Washer (57), and
a 3/8" Nut (42) (only one side is shown).
Do not
overtighten the Nuts; the Wheels must turn
freely.
57
34
42
96
91
3
TV/Audio
Cables
Summary of Contents for incline trainer i7.7
Page 2: ......
Page 43: ...41 NOTES ...
