11
11. Partially tighten the two 1/2" x 4 1/2" Screws (35) with
the two 1/2" Star Washers (83) that you removed ear-
lier through the top of the bracket near the right Upright
(93) and into the Base Frame (56); do not tighten the
Screws yet. Be careful not to pinch any wires.
Repeat this step on the left side of the incline
trainer.
Then, tighten the 1/2" x 4 1/2" Screws (35) and the 1/2"
x 2 1/2" Screws (49) on both sides.
93
35
49
56
83
11
12. Remove and discard the four indicated screws (A) from
the Console Base Back (107).
Remove the Console Base Back (107).
A
A
12
107
10
10. Partially tighten the two 1/2" x 2 1/2" Screws (49) that
you removed earlier through the bracket near the right
Upright (93) and into the Base Frame (56); do not
tighten the Screws yet. Be careful not to pinch any
wires.
Repeat this step on the left side of the incline
trainer.
93
49
56
