7
ASSEMBLY
• Assembly requires two persons.
• Because of its weight and size, assemble the
strength equipment in the location where it will be
used. Make sure that there is enough clearance
around the strength equipment.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, see page 6.
• The following tools (not included) are required for
assembly:
one adjustable wrench
one Phillips screwdriver
a set of metric hex keys
snap ring pliers
Assembly may be more convenient if you have
your own set of wrenches. To avoid damaging
parts, do not use power tools.
1
1. Orient the Connecting Frame (38) and the Main
Frame (68) as shown.
Have a second person
hold the Main Frame to prevent it from falling
until you complete step 2.
Remove the M10 Locknut (32), the M10 x 50mm
Socket Bolt (29), the two M10 Washers (31),
and the Large Pulley (24) from the Connecting
Frame (38).
Route the Cable (40) through the Connecting
Frame (38) as shown.
Attach the Large Pulley (24) inside the
Connecting Frame (38) with the M10 x 50mm
Socket Bolt (29), the two M10 Washers (31),
and the M10 Locknut (32) that you just removed.
Make sure that the Cable (40) is between the
Large Pulley and the rod on the Connecting
Frame.
29
31
31
Rod
32
68
24
38
40
Summary of Contents for F820.0
Page 20: ...20 NOTES...