10
6
6. Loosen the two M8 x 35mm Set Screws (19) a
few complete turns; it is not necessary to
remove the Set Screws.
Look under the top of the Tower Frame (1) and
remove the two 25mm Snap Rings (39) from
the two Weight Guide Bushings (18).
Lift the Weight Guide Bushings (18) until the
upper ends of the Weight Guides (7) are free.
Next, tip the upper ends of the Weight Guides
(7) forward or backward, and slide the two
25mm Snap Rings (39), the Drop-down Weight
(10), the two Upper Weight Bumpers (16), the
Top Weight (9), the Threaded 10-pound Weight
(42), and the Bored 10-pound Weight (71)
upward off the Weight Guides.
7
7. Look at the decals on the three 20-pound
Weights (8) and the thirteen 10-pound Weights
(44). Find the decal that has the
largest
num-
ber. Orient that Weight so that the decal is
facing
away
from the Assist Frame (38), and
slide the Weight onto the Weight Guides (7).
Repeat this step until all sixteen Weights (8,
44) are on the Weight Guides (7).
10
16
16
9
39
19 18
18
19
7
1
44
38
8
7
71
42
44
Summary of Contents for F812.0
Page 22: ...22 NOTES...
Page 23: ...23 NOTES...