Freemotion F812.0, Owner'S Manual

Page: 6 / 28

6
Refer to the drawings below to identify small parts used for assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. The number following the
parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preattached. To avoid damaging parts, do not use power tools.
PART IDENTIFICATION CHART
M6 x 15mm Button
Screw (35)–4
M6 x 18mm
Washer (34)–4
M4 x 13mm
Self-tapping
Screw (27)–2
M10 Washer
(31)–38
M10 Locknut
(32)–1
25mm Snap
Ring (39)–2
M10 x 35mm Socket
Patch Screw (76)–12
M10 x 30mm Socket
Patch Screw (30)–24
M10 x 35mm Socket
Bolt (72)–1
M12 x 80mm Socket Bolt (65)–1
M12 Locknut
(66)–1
M12 Washer
(63)–2