07
FEATURES
FEATURES
SPECIFICATIONS
AIR CONSUMPTION:
6.35 SCFM with 100
fasteners per minute @ 90 psi
AIR INLET:
1/4 inch NPT
MAGAZINE CAPACITY:
100 fasteners, 16 gauge
WEIGHT:
4.34 lbs
MAXIMUM PRESSURE:
100 psi
PRESSURE RANGE:
60 psi – 100 psi
FASTENER LENGTH RANGE:
3/4 inch to 1 inch
Compatible with generic brands of 16 gauge
fencing staples.
OPERATION
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool
allows users to direct the exhaust according
to operator preference. To adjust the direction,
turn the exhaust cap in the desired direction.
Connect the tool to the air supply.
Pull the Pusher backward until the Pusher
Pin set into the Stop Hole.
Insert appropriate nail strips from the top
of magazine.
Pull the Pusher Handle to get the Pusher
Pin released from the Stop Hole to let the
Pusher go back to move fasteners up to
the driving mechanism. The Pusher will
stop when it rests against the end of the
fastener.
1.
2.
3.
4.
LOADING FASTENERS
UNLOADING FASTENERS
Unloading is the reverse of loading, except
always disconnect the air source before
unloading.
3
60°ADJUSTABLE EXHAUST
Allows user to direct air away from face.
ONE PIECE DRIVER BLADE
For increased durability.
ANODIZED ALUMINUM CYLINDER AND
MAGAZINE
For long lasting durability.
COMFORT-GRIP HANDLE
For increased comfort and control.
ERGONOMICALLY ENGINEERED BODY
Rugged and Comfortable resulting in a
light-weight tool great for extended use.
ADJUSTABLE DEPTH
Depth is easily adjustable for various
applications.
QUICK-JAM RELEASE
Allows for easy access clearing in the
event of a jam.
●
●
●
●
●
06
UNPACKING
This
tool
has
been
shipped
completely
assembled.
Carefully
remove
the
tool
and
any
accessories
from
the
box.
Inspect
the
tool
carefully
to
make
sure
no
breakage
or
damage
occurred
during
shipping.
Do
not
discard
the
packing
material
until
you
have
carefully
inspected
and
satisfactorily
operated
the
tool.
If
any
parts
are
damaged
or
missing
,
please
call
1-888-669-5672.
!
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
!
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such
alteration or modification is misuse
and could result in hazardous
condition leading to possible serious
personal injury.
Such precautionary measures reduce the risk
of injury to persons.
LOADING
TOOL
Do
not
load
the
tool
with
fasteners
when
any
one
of
the
operating
controls
is
activated.
Never
place
a
hand
or
any
part
of
body
in
fastener
discharge
area
of
tool.
Never
point
the
tool
at
anyone.
Do not pull the trigger or depress the
workpiece contact as accidental
actuation may occur, possibly causing
injury.
●
●
●
●
!
The warnings and precautions
discussed above cannot cover all
possible conditions and situations that
may occur. It must be understood by
the user that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by the user.
WARNING:
HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672
HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672
Pull backwards
Pusher
Stop Hole
Pusher Pin
Pusher handle
MODEL:
PFS16
MODEL:
PFS16
Stop Hole
Pus
h fo
rwa
rd
Pusher
Handle
Staples
(16Ga.)
PULL
!
WARNING:
The tool may fire when it is first
connected to the air source. Always
connect the tool to the air source
before loading fasteners to prevent
injury from unintended cycling. Always
make sure the tool’s magazine is empty
at the beginning of each work session,
before connecting to an air source.
!
WARNING:
Keep the tool pointed away from
yourself and others when loading
fasteners. Failure to do so could result
in possible serious personal injury.
!
WARNING:
N e v e r l o a d f a s t e n e r s w i t h t h e
workpiece contact or trigger activated.
Doing so could result in possible
serious personal injury.
Only use those fasteners recommended
for use with this tool. Fasteners not
identified for use with this tool by the
tool manufacturer can result in a risk of
injury to persons or tool damage when
used in this tool.
WARNING:
!
Always unload all fasteners before
removing tool from service.
Always disconnect the air source before
unloading.
!
!
WARNING:
!
WARNING:
18mm
25mm
1”
(16 Ga.)
3
/
4”
22mm
7
/
8”
