Freecom Ultrium Generation 2, Manual

Page: 3 / 36

1
Contents
Read the “Pre-Installation” and “Installing the tape drive” sections if you have to install or
replace your Ultrium tape drive. If you have purchased your tape drive pre-installed in a
server, go directly to the operating and troubleshooting information commencing on page 23.
Pre-Installation
Before you start page 3
Backup software and drivers page 5
Usage models page 7
Installing the tape drive
Step 1: Check the SCSI connection page 9
Step 2: Check the drive’s SCSI ID page 11
Step 3: Connect the SCSI cable page 13
Step 4: Connect the power cable page 15
Step 5: Verify installation page 17
Using the tape drive
Your Ultrium tape drive page 19
Use the correct media page 21
Optimizing performance page 23
Troubleshooting page 25
Understanding the LEDs page 29
Problems with cartridges page 32
gen2 external oem.fm Page 1 Thursday, February 13, 2003 3:02 PM