background image

Operating instructions   English

1.

Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Features   Media formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.

Internal SCSI CD-RW (Example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internal IDE ATAPI CD-RW (Example 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internal IDE ATAPI CD-RW (Example 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.

How to Use the Discs . . . . . . . . 
Before Asking for Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 
  4
  5

 

page 13
page 21

page 24
page 25

1   General

Cautions

l

Please 

 

notice that the manufacturer of this equipment does not offer

any warranty against data loss due to inappropriate installation or handling,
or direct or indirect damages.

l

Pleasetake noticethatthe manufacturerwill bear no 

or indirect damages caused by the use of this product or its malfunction.

l

Please take notice that the manufacturer will bear no responsibility for

damage to data caused by this product.

l

Please backup (copy) all important data as protection against data loss.

Cautions During Installation

l

Install the drive in accordance with the specifications. Be careful to avoid
locations likely to cause vibration or shock.

l

Avoid locationswhere there is high humidity, much dust, or poor ventilation.

l

Avoid locations in direct sunlight, with severe changes in humidity, or places
where there are extremely high or low temperatures.

l

Don’t 

 

the drive near radio or television receivers. It 

may 

interfere with

their reception.

l

Dismantling the drive to attempt repairs or for other reasons is dangerous
because the laser may radiate outside the unit. Do not 

 the drive.

Summary of Contents for Internal IDE
































Reviews: