b) Single Hard-disc connected as master to Primary IDE Port:
Connect FREECOM CD-RW as Master to Secundary Port.
c)
Hard-disc connected as Master to Primary IDE Port,
CD-ROM connected as Slave to Primary IDE Port:
Connect FREECOM CD-RW as Master to Secundary IDE Port.
I
-
-
-
-
Note: Installation A is preferred for systems with an
IDE
Hard-disc and CD-ROM.
Installation B is preferred for systems with only an
IDE
Hard-disk.
5.
Locate the free end of the
IDE
data cable and thread it out through the open
drive bay. Do the same with the power cable and the (optional) audio cable.
6.
Connect your (optional) audio cable,
IDE
data cable and the powercable into
the back of the FREECOM CD-RW. Make sure you correctly align pin
1
of the
cable to pin
1
of the connectors.
Summary of Contents for Internal IDE
Page 1: ......
