IDE CONNECTOR: 40
pin
IDE
flatcable connector
HOST DC POWER CONNECTOR
( t y p e
AMP 00641737-l)
2: GND
3: GND
4 3 21
2.
Installing the drive
1. Turn off your computer, monitor and other peripherals.
To
disconnect your
configuration completely from the mains, the mains plug has to be
2.
Remove the cover from your computer. Please consult the manuals that came
with your computer for specific details.
3. In order to mount the drive inside your PC (or other type of computer), locate
a free 5.25” bay and followthe instructions, as provided with your computer
systems, for installing the drive. When you are planning to use 8 cm discs your
drive should be mounted horizontaly or you should use an adapter (for
information contact your local supplier).
4. You have several possibilities to install your
IDE
data cable depending on
your existing configuration:
a) Hard-Disc connected as Master to Primary
IDE Port,
CD-ROM connected as Master to Secundary
IDE Port:
Connect FREECOM CD-RW as Slave to Secundary
IDE Port.
I n
n n
2 2
Summary of Contents for Internal IDE
Page 1: ......
