![background image](http://html1.mh-extra.com/html/freecom/fc-tapeware-ait-450i/fc-tapeware-ait-450i_manual_2329528070.webp)
6.Command Specification
LOG SENSE
6-16
SONY AIT-1 Turbo drive SDX-450V series Ver.1.0
Table 6-10: Threshold Met criteria
TMC
Threshold Met Criteria
00b
01b
10b
11b
Any update of the parameter
Cumulative = Threshold
Cumulative < > Threshold
Cumulative > Threshold
LP
: The LP bit field defines whether the parameter is a data counter or a list parameter. See the description of each
supported page below for information on the setting of this field.
Note
: If any of the other bit-fields in the control byte are set then the command will terminate with a CHECK
CONDITION status with a sense key of ILLEGAL REQUEST and an additional sense code of INVALID FIELD IN
PARAMETER LIST
6.6.3. Supported Log Pages
The following log pages are supported:
Table 6-11: Supported Log pages
Page Code
Description
Allocation Length
00h
02h
03h
07h
30h
31h
33h
34h
35h
39h
3Ch
3Dh
3Eh
Supported Log Pages
Write Error Counter Page
Read Error Counter Page
Last n Error Events Page
Tape Log Page (Sony Unique)
Tape Capacity Log Page
Drive Usage Log Page (Sony Unique)
Write Frame Error Counter Page
Read Frame Error Counter Page
Transfer Log Page
AIT Log Page
AIT Fixed Length Information Page for MIC
AIT Variable Length Information Page for MIC
12h
20h
20h
1A8h (max.)
5Ch
24h / 404h( 404h –AIT mode)
8Eh
3Ch
4Ch
5Ch
90h X Partition_4
334h – MIC Phase 1
37ch – AIT mode 2k MIC
4a8h – AIT mode 8k MIC
n
A description of each supported log page is given below.
Summary of Contents for FC TapeWare AIT-450i
Page 1: ......