24
©2011
MAINTENANCE INSTRUCTIONS
CLEANING
Care has been taken to assure that your treadmill has been properly adjusted and lubricated at
the factory. It is not recommended that the user attempt service on the internal components
instead seek service from an authorized service center. However, from time-to-time the outer
surfaces may appear dull or dirty, following the instructions listed below will restore and
preserve the original finish.
Note: Always unplug your treadmill prior to cleaning in order to avoid electrical hazard
or shock.
1. Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth rag with a
light application of car wax. Do not use aerosol sprays or pump bottles as they may deposit
wax upon the walking or computer surface.
2. Under no circumstances are you to use ammonia, oils, silicones or any other compounds on
the rubberized walking surface. The use of such materials may cause serious injury to the
body and/or deteriorate the performance of the walking surface. Only clean the rubberized
walking surface with a damp cloth (water only).
3. From time-to-time the computer surface may collect dust or finger prints. The use of harsh
chemicals will destroy the protective coating and cause a static build up that will damage the
components. This surface may be cleaned with specially prepared chemicals found in most
computer supply stores especially made for anti-static surfaces. It is strongly recommended
that you purchase such a cleaning compound.
Summary of Contents for C 249 29279 0
Page 22: ...21 2011 EXPLODED DIAGRAM...
Page 32: ...31 2011...
